Fire monitors with foam eductors make it possible to form a foam spray promptly. Only water is supplied via pipes or hoses to the fire monitor with foam eductor. Dosed supply of foam agent into the water flow is effected from a separate container by the eductor located in the nozzle through a vacuum hose. At the output of the monitor, a foam spray is formed, and in case of shutting off the supply of foam agent, a straight or dispersed water stream is formed.


Name of parameters
Nominal pressure, MPa 0,8
Operating pressure range, MPa 0,4-1,0
Flow rate of water (foam agent solution), l/s 60
Stream range (outermost) at nominal pressure, m, not less than::
- straight water stream 73
- dispersed (at a stream discharge angle of 30°) 43
- straight foam 61
Angle range of a dispersed water stream, degrees 0-90
Concentration of foam former's water solution, % 3±0,6; 6±1,2
Working area of monitor rotation, degrees:
- vertical up +90 to -45
- horizontal 345
Electric supply voltage, V -
Displacement speed, degree/s:
- sprinkling / targeting 3-6 / 8-10
Weight, kg, not more than -
Useful information

Fire monitors with foam eductors enable to avoid using of expensive foam dosing pump stations and are an effective means for obtaining high-quality foam for the protection of oil and gas facilities.

Certificates All certificates

Products: Water-foam fire monitors, universal, with manual and remote control, stationary, portable, trailer-mounted (including construction versions: low - "n", ball-socket - "b", explosion-proof - "Ex") of LS, LSD types, are manufactured in accordance with the Technical specifications TU 4854-003-16820082-2008 with amendment 7.

The products comply with the requirements of the Technical regulations TR EAEU 043/2017 "On the requirements for fire safety and fire extinguishing equipment".

Certificate validity period: from 06.07.2021 till 06.06.2026.

Your privacy is our concern This site uses cookies. You consent to their use by continuing using this site.